SBP2ASPI
(ver 1.00)
Abandoned Freeware


SBP2ASPI is a FireWire 1394(SBP2) ASPI driver for DOS.  
There is no documentation, but these switches have been discovered 
and partially interpereted:


DEVICE=SBP2ASPI.SYS [/V] [/H:x] [/RES] [/RBC] [/B] [/M:xxxx] [/I:xx]

/V - verbose mode.

/H:x - x is the OHCI1394 controller number (0 to 9) to which the device 
is attached.  If not specified, SBP2ASPI assumes it to be 0.

/RES - forces SBP2ASPI to stay resident, even without devices attached.

/RBC - The SCSI command set for HDD was split into two standards, full 
(SBC) and reduced (RBC). By default, SBP2ASPI assumes the attached device 
to be a SBC device. This switch allows RBC devices to be connected.

/B - ???

/M:xxxx - xxxx - hexadecimal two byte number, ???

/I:xx - xx - hexadecimal one byte number, ???